SONY 9x (CLONED) Virus Infected DONE

Discussion in 'Infinity-Box' started by Ligalig, Nov 22, 2016.

  1. Ligalig

    Ligalig VIP Member

    1st option SCAN thru AV SMART by CM2 sad to say nag stock on logo nalang. me back up ako akso hindi ko naitry ibalik me nakita kasi ako kaya try lang if mag work,

    - TESTED ROM (DO RESET AFTER FLASH) wg mainip matagal...
    - PASS: djakaplaza
    Code:
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 25 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6580
    BB_CPU_NME : [MediaTek] MT6580_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x94
    NAND Flash : NOT INSTALLED
    eMMC Flash : 150100464A3235414202327E9A1DB2A9
    Initialize Memory ...
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , BA52J
    [eMMC] : FLASH_CID : 150100464A3235414202327E9A1DB2A9
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : 0xB9EEEB7E6F397CBF59AADBA066111F4D
    INT RAM : 0x00020000
    EXT RAM : 0x20000000 [512 MiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    ScatCFG : BaseBand : MT6580 , Project : mtk_android , Storage : EMMC
    Setting : Flash Pre-Erase (Safe) : Enabled
    Setting : AFF verify : Enabled
    Setting : HW verify : Enabled
    
    BL : Check HW compatibility
    BL : BBID supported by BootLoader!
    BL : Check eMMC compatibility
    BL : eMMC supported by BootLoader!
    
    BL : BatteryLevel : 3697 mV
    BL : BatteryLevel Ok
    
    BL : Flash Pre-Erase
    Total blocks to Erase : 2
    Erase : 0x0000000000380000-0x0000000000500000
    Erase : 0x0000000001C80000-0x00000000E6300000
    Flash Pre-Erase Done, time used : 00:00:02
    
    SecCfg Passed , 1799
    BMT remark not need. Will skip
    Sending Preloader ...
    Use : preloader.bin
    Preloader Sent , Init passed
    SecCfg Passed , 1799
    PartCount : 0014
    Update PMT by user request
    Repartition Done!
    Use FLN Mode
    
    Processing : Flash Write
    Flash now : LK
    Image Flash Ok
    Flash now : BOOT
    Image Flash Ok
    Flash now : RECOVERY
    Image Flash Ok
    Flash now : LOGO
    Image Flash Ok
    Flash now : SECRO
    Image Flash Ok
    Flash now : SYSTEM
    Image Flash Ok
    Flash now : CACHE
    Image Flash Ok
    Flash now : USERDATA
    Image Flash Ok
    Flash Write Done, time used : 00:07:43
    
    Processing : Verify
    Verify Passed : LK
    Verify Passed : BOOT
    Verify Passed : RECOVERY
    Verify Passed : LOGO
    Verify Passed : SECRO
    Verify Passed : SYSTEM
    Verify Passed : CACHE
    Verify Passed : USERDATA
    Data Verify Done, time used : 00:00:29
    
    Update Mirror PMT
    Update Done!
    [​IMG]

    [​IMG]
     

Share This Page